Mold is the mother of industry. It is because of the existence of mold that goods can be copied and mass produced. Injection mold has become a more and more widely used part in the mold field. The injection mold factory needs all kinds of precision equipment in the process of producing injection molds to produce a set of injection molds. What equipment does the general injection mold factory have

Milling machine: a machine tool that uses a milling cutter to process various surfaces on a workpiece; The milling machine can mill, drill and drill the workpiece

Drilling machine: a machine tool that uses a drill bit to process holes in a workpiece. The drilling machine has simple structure and low machining accuracy. It can drill through holes and blind holes, replace special tools, expand, spot facer, ream or tap

Lathe: a machine tool for turning rotating workpieces with a knife. Lathes can also be used for corresponding processing, such as drill bits, reamers, taps, dies and knurling tools

Large water mill: grind the workpiece by rotating the grinding wheel to achieve the required flatness. According to the shape of the worktable, it can be divided into rectangular worktable and circular worktable. The main parameters of rectangular worktable surface grinder are the width and length of worktable, and the main parameters of circular worktable surface grinder are the diameter of worktable. According to the type of shaft, it can be divided into horizontal shaft grinder and vertical shaft grinder. Due to the large amount of heat generated in the working process and the need to use a large amount of coolant (generally water, sometimes oil), it has the nickname of large-scale water grinding machine

CNC machining center: CNC machining center is a CNC machine tool controlled by CNC system. It can process very complex and difficult workpieces, which is unmatched by ordinary machine tools. Moreover, the effect of machining workpieces is very good and the efficiency is also very high. All operations can be completed after the workpiece is clamped once. Because the NC machining center has its own tool magazine, it can complete automatic tool change.